Encoder 8x HDMI / SDI / CVBS EX 5108H , EX 5108S , EX 5108A

EX5108 / EX 5104 Encoder 8x / 4x (HDMI / SDI / CVBS)
Encoder for Multicast / OTT IPTV

Antiktech

The EX5108/EX5104 is a series of high density real-time H.264 HD/SD Encoders that can support up
to eight High Definition (HD) A/V signals compressing and encoding simultaneously. These A/V signals can be fed into the unit via 8x HDMI or 8x SDI input ports as different factory options. The encoded streams can be then remultiplexed and output over its GbE IP and ASI ports. All the models support the Time Base Correction (TBC) to ensure the audio and video synchronisation, the features necessary for the professional TV signal flow. The series provides two TS/IP operation modes. The first is “Full Duplex”, which allows one MPTS or SPTS inputted over 1 multicast/unicast to make up a new MPTS with local encoders, then sends out the new one over 1 multicast/unicast. In the second mode “Multiple output” which delivers up to 9 streams over IP. There are 8 un-stuffed SPTS (lower bit rate but less PCR accurate than normal SPTS, from local encoders) and 1 MPTS (from internal reMultiplexer) over the IP with different Unicast or Multicast IP addresses. The EX5108/EX5104 allows user to configure, monitore and manage the informative front panel and keypad, or Web interface, or SNMP based management software from 3rd party. This Encoder family presents a brilliant picture quality, high density design, high stability system architecture, and the hot-swappable power supply.

KEY FEATURES

  • H.264/AVC HP@L4.0 Encoder
  •  MPEG1 Layer II, MPEG2 AAC-LC, MPEG4
  •  AAC-LC audio compression
  • 4/8 channels real time encoder with re-multiplexed integrated
  •  Built-in re-Mux accepts up to 10 SPTS / MPTS
  •  ASI input & Redundant ASI output
  •  Full duplex Gigabit TS over IP I/O
  • Up to 9 multicast/unicast output
  • VBR and CBR encoding mode
  •  Free resolution downscale at same frame rate
  • SNMP & HTTP WEB
  • Redundant Power Supplier

Antiktech

EX 5108S Encoder

Antiktech
 

EX 5108H Encoder
 

Antiktech

 

EX 5108AV Encoder

Antiktech

 

 

Specification:

 

Video input & compression

Number of input ports HDMI x 4/8 or HD-SDI x 4/8
Compression Standard H.264/AVC HP@ L4.0
Video Sampling Format 4:2:0, 8-bit, YCbCr
Video Encoding Bit Rate 2~30Mbps for each channel
Video Resolution & Recommended Bit Rate

  • 1080p (1920×1080) @ 59.94 Hz,50Hz: SMPTE296M: 6~30Mb/s
  • 1080 (1920×1080) @25Hz,29.97Hz,30Hz:SMPTE274M: 6~24Mb/s
  • 1080i (1440×1080) @25Hz,29.97Hz,
  • 30Hz:SMPTE274M: 5~24Mb/s
  • 720p (1280×720) @50Hz,59.94Hz,
  • 60Hz:SMPTE296M: 4~24Mb/s
  • 480i (720×480) @29.97Hz:SMP - TE656M: 2~10Mb/s
  • 576i (720×576) @25Hz: SMPTE656M: 2~10Mb/s

 

Other Video Resolution Free resolution downscale at same frame rate
Aspect Ratio 4:3/16:9 Selectable

 

DVB-ASI Input

Interface BNC Female, 75Ω
Maximum Input Bit Rate 100 Mb/s
Data Transfer type Byte
Packet Length 188 or 204 Bytes
Signal Level  200 ~ 880mVp-p

 

DVB-ASI Output

Interface BNC Female, 75Ω
Maximum Input Bit Rate 120 Mb/s
Data Transfer type Byte
Packet Length 188 or 204 Bytes
Signal Level 800 ± 80mV


Gigabit TS_over_IP (Full Duplex Mode)

Standard IEEE 802.3, 10/100/1000 Base-T, Full Duplex
Max. Effective Bit Rate 80Mb/s
Data Protocol UDP or RTP, SPTS or MPTS
Control Protocol ICMP, ARP, IGMPv2

Gigabit TS_over_IP Output (Multi-Channel IPTV Mode)

 

Standard IEEE 802.3, 10/100/1000 Base-T
Max. Effective Bit Rate 200Mb/s
Data Protocol  UDP or RTP, SPTS or MPTS
Control Protocol ICMP, ARP, IGMPv2


Rear Panel


ASI In 1×BNC Female, 75Ω
HD-SDI In 8×BNC Female, 75Ω (DXP- 5800/5801EC-S)
HDMI In 8×HDMI Male, 75Ω (DXP- 5800/5801EC-H)
ASI Out 2×BNC Female, 75Ω (1 Backup)


Front Panel


Control 1×RJ-45, 10/100 Base-T
TS/IP  1× IP (GbE), RJ-45, 10/100/1000 Base-T
Display 2×20 LCD Display Audio Input & compression
Input HDMI or SDI Embedded audio
Audio Compression MPEG1 Layer II, MPEG2 AAC-LC, MPEG4 AAC-LC (option)
Sampling Rate 48KHz
Compression Bit Rate 32~192Kbps( -Mono), 64~384Kbps (Stereo), 128~512Kbps(AAC LC)


Others


Power Supply AC90~260V 50/60Hz
Operating Temperature 0~45°C
Storage Temperature -10~60°C
Operation Humidity 10~90%, (Non-condensed)